Parts required to carry out an installation of the Siemens HKC-520 SL55 car phone kit



Siemens HKC-520 handsfree car phone kit for the SL55
To carry out your own installation you will require the following parts from the online shop. Some parts are optional.

The Siemens HKC-520 SL55 Handsfree car phone Kit - information page

Siemens HKC-520 handsfree car phone kit for the SL55

We carry the Full range of Autoleads Cellular Telemute leads

REQUIRED (We can not supply this item!)
OPTIONAL
An Siemens HKC-520 SL55 Handsfree car phone kit
An Autoleads Telemute lead for putting the sound through the car stereo system (12 volt only).
Autoleads 06-206B Siemens adaptor
We can supply the full range of Dashmount "No Holes"  Mounting brackets
OPTIONAL
OPTIONAL
An Adaptor for use with the Telemute lead - REQUIRED with some 6 pin Telemute's, 4 pin ones will also require an 06-221B adaptor.
A "No Holes" Dashmount or Proclip bracket or Leather Pod

We do appreciate that not everyone is Technically minded. We do however, provide FREE technical support on any products that we supply to customers who wish to carry out the installation themselves.

N.B. You would be expected to have some technical knowledge yourself, we will not supply a complete A-Z of how to install your car kit, but we will offer assistance where appropriate should you get stuck. Please ensure you have all your vehicle and car kit details to hand when getting in touch with us and a 12 volt automotive test lamp or multimeter available for testing and configuration purposes.

If you are in any doubt about your own ability to install any of the products available from the online shop, you should always get a professional Installation company or Auto electrician to do the job for you!

If you are not a Technically minded person we do have an Installation Service .

The Siemens HKC-520 SL55 car kit is one of the latest offerings from Siemens. We are very impressed by the build quality of these new car kits.

Nifty little phone the SL55, it slides open before being put in the cradle. The cradle has more data contact pins than normal to cover the extra features of the phone. This new connector is going to be the standard for all new Siemens handsets. The cradle comes in two parts, and as far as we know, if you change the handset you will only have to change the upper portion of the cradle.

The only phone supported by the Siemens HKC-520 car phone kit is the SL55.

A Dashmount or similar "No Holes" bracket is advised for mounting the handset cradle onto as the bracket can only be screwed into a flat surface with no angular adjustment available.

Ignition sensing and audio muting is supported as a standard feature with this car kit provided your radio supports muting. You can mute the stereo and redirect the phone kits audio through the cars stereo system with the addition of an Autoleads Cellular Telemute interface lead and a 06-206B adaptor.

This kit does NOT support an external antenna, it uses the phones own one which may cause interference issues on some head unit types.

New Siemens SL55 handset
L36880-N3015-A118 C25
Siemens

Supported handset is the SL55