When you wish to put your handsfree car phone kit through your stereo and make it mute during a call, and redirect the audio through the cars audio system, you will require an Autoleads Cellular Telemute Interface lead.
These are available from our Autoleads Cellular Telemute lead section of the online shop.
All Autoleads Cellular Telemute leads up until 2005 were made to the Nokia standard 6 pin Molex plug configuration as used in car kits like the Nokia CARK-91. Some newer leads will have the new Nokia 2002> 4 pin Molex connector, which means if you wish to install your Motorola kit you may also require a 06-221B adaptor.
In order to use any Motorola 2004> handsfree car phone kit with the black 6 pin micro molex power connector with any Autoleads Cellular Telemute Interface lead you will require the adaptor listed above. This simply plugs into the Nokia 6 pin Molex power plug on the fly lead of the Telemute and saves you chopping any wires keeping the warranty of the lead intact.
This adaptor is not suitable for earlier kits like the T280i kit which has a larger white 6 pin Molex connector, if you have this you will require the 06-203B adaptor instead.
All Autoleads products should be Installed by a suitably qualified technician. We will not be held responsible for damage to the vehicles electrical system due to incorrect installation or misuse of the product.
We will however provide FREE technical support via e-mail, or our Technical support forum. You would be expected to have a good understanding of vehicle electric's and a suitable 12 volt test lamp probe available for testing and configuration purposes.