This is a brand new item from Autoleads. How many of you have bought a Parrot bluetooth car kit, only to find that the standard ISO connector plugs on the Parrot Telemute lead included with the kit are different to the ones on your stereo?
This long awaited new adaptor will allow you to use any of the currently available range of Autoleads Cellular Telemute interface leads with the following Parrot car kits (Not CK3000) Will Suit -
This product will allow you to install your Parrot Bluetooth car kit in even more cars than ever before that do not have ISO connectors as standard. We already have a large range of SOT adaptors that will plug onto the end the Parrot kit loom supplied with the kit but these are not suitable or available for every car type. With the new 06-223B adaptor you can select a Telemute lead from our existing range HERE and plug this adaptor onto the end of the Telemute fly lead in much the same manner as all the other Telemute adaptors. You will not require the Parrot loom supplied with the kit when using this setup, the 06-***B lead + 06-223B adaptor will replace it. You may even find this a lot easier to hide behind the dash than using an SOT Adaptor lead.
All Autoleads Cellular Telemute leads up until 2005 were made to the Nokia standard 6 pin Molex plug configuration as used in car kits like the Nokia CARK-91. Some newer leads will have the new Nokia 2002> 4 pin Molex connector, which means if you wish to install this adaptor then you may also require a 06-221B adaptor.
This adaptor also supports the green and brown low audio output wires which can be used on head units with direct Audio input instead of the line level output from the 3.5mm jack socket which is normally connected to the Telemute lead.
This adaptor is also very useful if you already have an existing car kit installed using an Autoleads Telemute lead, all you will have to do is add this adaptor onto the end of your existing Telemute lead!
