When you wish to put your handsfree car phone kit through your stereo and make it mute during a call, and redirect the audio through the cars audio system, you will require an Autoleads Cellular Telemute Interface lead.
These are available from our Autoleads Cellular Telemute lead section of the online shop.
All Autoleads Cellular Telemute leads are made to the Nokia standard 6 pin Molex plug configuration as used in car kits like the Nokia CARK-91. (Except the 06-122B Vauxhall lead which has the new Nokia 2002> 4 pin Molex connector)
An optional extra that can be used with Telemute leads that use the V2 relay. Provided your radio also supports a Telephone mute input or wire. Leads supported are the - 06-059B ,and 06-090B.
This allows the use of the CD Pause and "Phone" to be displayed on radios that support this feature. The lead simply plugs into the V2 module in the 2 pin Molex connection. Supplied with a red insulated bullet connector for direct connection to mute wires on head units, or you can cut this off and bare back the wire and insert in the relevant ISO mute position on the radio.
All Autoleads products should be Installed by a suitably qualified technician. We will not be held responsible for damage to the vehicles electrical system due to incorrect installation or misuse of the product.
We will however provide FREE technical support via e-mail, or our Technical support forum. You would be expected to have a good understanding of vehicle electric's and a suitable 12 volt test lamp probe available for testing and configuration purposes.