---

When you wish to put your handsfree car phone kit through your stereo and make it mute during a call, and redirect the audio through the cars audio system, you will require an Autoleads Cellular Telemute Interface lead.

These are available from our Autoleads Cellular Telemute lead section of the online shop.

All Autoleads Cellular Telemute leads up until 2005 were made to the Nokia standard 6 pin Molex plug configuration as used in car kits like the Nokia CARK-91. Some newer leads will have the new Nokia 2002> 4 pin Molex connector, which means if you wish to install any other make of kit apart from Nokia, or an older Nokia kit such as the CARK-91, then you may also require a 06-221B adaptor.

In order to use any other mainstream handsfree car phone kit with any Autoleads Cellular Telemute Interface lead you will require the adaptor listed above. This simply plugs into the Nokia 6 pin Molex power plug on the fly lead of the Telemute and saves you chopping any wires keeping the warranty of the lead intact.

If you have purchased any other kit other than the main 4 from Nokia, Siemens, Motorola or Ericsson, provided that you kits power loom supports 12 volt live, 12 volt ignition sense, earth and mute connections you can use this adaptor to connect your aftermarket hands free car kit to an Autolead.

All you have to do is cut back your power loom and butt connect it to the adaptor using the crimp type butt connectors provided.

---

---