This lead will suit the following vehicles:
Cellular Telemute leads are used when installing an aftermarket hands free car phone kit. Once installed the lead will mute your head unit and redirect the call through the vehicles front speakers. All of the Autoleads Telemute leads are terminated with the standard Nokia 6 pin Molex power plug. If using another make of handsfree car kit you will require an Adaptor Lead for converting the Autoleads Telemute lead without chopping the wires and invalidating it's warranty. These leads supply your hands free car kit with power as well so you that you do not have to run cables directly to your cars battery.
Advantages include:
The 06-116B Telemute lead from Autoleads Is a Vehicle Specific type lead that may require some configuration with VW cars. "PHONE" is displayed on the stereo during a call. You will get crystal clear audio reproduction through the vehicles own front two speakers.
This lead is suitable for 12 volt negative earth systems only!
This lead is virtually "Plug and Play" with VW cars that use the newer Flat pin type 40 way Quadlok type connector plug. You may have to snip the blue ignition wire on the fly lead that comes from the kit and lead it to a separate ignition switched feed when using a Bluetooth car kit on certain models as this supply is normally powered constantly on the head unit. This lead has been revised and the only swapping of plugs that may be required is if you have a factory CD changer.
If you require further information on this product either post on our forum or you can contact the Autoleads technical department via their Website at www.autoleads.co.uk.
All Autoleads products should be Installed by a suitably qualified technician. We will not be held responsible for damage to the vehicles electrical system due to incorrect installation or misuse of the product.
We will however provide FREE technical support via e-mail, or our Technical support forum. You would be expected to have a good understanding of vehicle electric's and a suitable 12 volt test lamp probe available for testing and configuration purposes.