The Autoleads 06-090B PSA Group ISO Cellular Telemute Interface lead



Autoleads 06-090B PSA Group ISO Cellular Telemute Interface lead

06-090B additional Technical Information

The PSA Group ISO lead is designed to fit French cars that either do not have an ignition switched 12 volt live power feed at the rear of the head unit such as the Peugeot 307 that are using a CAN BUS or VAN BUS computerised system to control the head unit .This lead has a separate blue wire which is 1.2 metres in length that can be run to an alternate ignition switched source such as the glovebox light on some cars or the cigarette lighter power feed. NOT SUITABLE FOR AMPLIFIED SYSTEMS!

This lead will suit the following vehicles:


Cellular Telemute leads are used when installing an aftermarket hands free car phone kit. Once installed the lead will mute your head unit and redirect the call through the vehicles front speakers. All of the Autoleads Telemute leads are terminated with the standard Nokia 6 pin Molex power plug. If using another make of handsfree car kit you will require an Adaptor Lead for converting the Autoleads Telemute lead without chopping the wires and invalidating it's warranty. These leads supply your hands free car kit with power as well so you that you do not have to run cables directly to your cars battery.

Advantages include:

The 06-090B Telemute lead from Autoleads Is a Vehicle specific ISO connector type lead that does not require to be connected to the mute position on the rear of your head unit but you can do this if required with the optional mute wire. The version 2 type relay fitted to this lead will automatically mute all of the cars speakers during a call. This lead enables crystal clear audio reproduction through the vehicles own front two speakers.

This lead is suitable for 12 volt negative earth systems only!


All Autoleads products should be Installed by a suitably qualified technician. We will not be held responsible for damage to the vehicles electrical system due to incorrect installation or misuse of the product.

We will however provide FREE technical support via e-mail, or our Technical support forum. You would be expected to have a good understanding of vehicle electric's and a suitable 12 volt test lamp probe available for testing and configuration purposes.

06-090B Product Specification and Technical Information

This lead may require some configuration of the 12 volt constant live and the 12 volt switched live bullet connections on the lead to suit your head unit. There is no need to connect into the mute position on the back of the head unit as the type 2 relay fitted to this lead automatically mutes all the cars speakers. You will have to find an alternate ignition switched power source to connect the blue wire to which can normally be obtained from the cigarette lighter, glovebox light or fuse box power feeds. All connections should be soldered and fitted with a 2 amp in line fuse.
Optional mute wire available! CLICK HERE