The Autoleads 06-084B Early Volvo Cellular Telemute Interface lead



The Autoleads 06-084B Volvo  cellular telemute mute lead

06-084B additional Technical Information

This lead is designed to work with Volvo head units that have the older black speaker and power plugs at the rear of the stereo. Earlier head units have a release tab at either side of the radio. The lead can be configured to use the mute feature of the stereo if available or to switch the head unit off during a call if it is not available.

The Early Volvo Telemute lead is designed only to fit the vehicles listed below that have Volvo black plugs on the rear of the stereo and is not suitable for aftermarket radio's. This lead is virtually "PLUG AND PLAY" . Some earlier head units have a mute function and this can be configured on the lead. The lead can also be configured to switch the stereo off during a call if there is no mute available..

This lead will suit the following vehicles:

Not Suitable for Amplified Systems!


Cellular Telemute leads are used when installing an aftermarket hands free car phone kit. Once installed the lead will mute your head unit and redirect the call through the vehicles front speakers. All of the Autoleads Telemute leads are terminated with the standard Nokia 6 pin Molex power plug. If using another make of handsfree car kit you will require an Adaptor Lead for converting the Autoleads Telemute lead without chopping the wires and invalidating it's warranty. These leads supply your hands free car kit with power as well so you that you do not have to run cables directly to your cars battery.

Advantages include:

The 06-084B Telemute lead from Autoleads Is a Vehicle Specific type lead that does require some configuration of the mute or switched live bullet connections depending on stereo type. You will get crystal clear audio reproduction through the vehicles own front two speakers.

This lead is suitable for 12 volt negative earth systems only!


All Autoleads products should be Installed by a suitably qualified technician. We will not be held responsible for damage to the vehicles electrical system due to incorrect installation or misuse of the product.

We will however provide FREE technical support via e-mail, or our Technical support forum. You would be expected to have a good understanding of vehicle electric's and a suitable 12 volt test lamp probe available for testing and configuration purposes.

06-084B Product Specification and Technical Information