This lead is designed to work only with Jaguar cars fitted with standard or Sat Nav non amplified head units. It will automatically mute the sound from the stereo during a call. Most 2004 onwards cars have dropped the ignition switched live feed at the rear of the stereo in favour of the new CAN BUS system. This means that you may have to run a separate ignition switched live to either the cigarette lighter, fuse box or glovebox light feeds on these cars.
This lead does not integrate with the Factory radio or steering wheel phone controls! This is only available as a Jaguar Factory/Retro fitted installation.
If you require further information on this product either post on our forum or you can contact the Autoleads technical department via their Website at www.autoleads.co.uk .
This lead will suit the following vehicles:
Not Suitable for Alpine Amplified Systems! For Alpine amplified systems use 06-098B.
Cellular Telemute leads are used when installing an aftermarket hands free car phone kit. Once installed the lead will mute your head unit and redirect the call through the vehicles front speakers. All of the Autoleads Telemute leads are terminated with the standard Nokia 6 pin Molex power plug. If using another make of handsfree car kit you will require an Adaptor Lead for converting the Autoleads Telemute lead without chopping the wires and invalidating it's warranty. These leads supply your hands free car kit with power as well so you that you do not have to run cables directly to your cars battery.
Advantages include:
The 06-082B Telemute lead from Autoleads Is a Vehicle Specific type lead that does not require any configuration .You will get crystal clear audio reproduction through the vehicles own front two speakers.
This lead is suitable for 12 volt negative earth systems only!
All Autoleads products should be Installed by a suitably qualified technician. We will not be held responsible for damage to the vehicles electrical system due to incorrect installation or misuse of the product.
We will however provide FREE technical support via e-mail, or our Technical support forum. You would be expected to have a good understanding of vehicle electric's and a suitable 12 volt test lamp probe available for testing and configuration purposes.