This lead can be configured to use the mute if there is one available but usually comes preconfigured to switch the radio off during a call, this should be checked first before changing any connections. If only the front speakers mute then it will require either a mute connection on the radio or to be configured to switch off during a call. If the lead switches off the radio, then if there is a mute, this should be reconfigured by swapping the red wires back before attaching the mute wire. You cannot have mute and switching off wires connected at the same time or you will blow the V3 module!
If you require further information on this product either post on our forum or you can contact the Autoleads technical department via their Website at www.autoleads.co.uk.
This lead will suit the following vehicles:
To Purchase this item see - www.siocommunications.co.uk/Shopping/view_product.php?product=06-077B
Not Suitable for Bose Amplified systems. Use 06-042NB for cars with Bose!
Cellular Telemute leads are used when installing an aftermarket hands free car phone kit. Once installed the lead will mute your head unit and redirect the call through the vehicles front speakers. All of the Autoleads Telemute leads are terminated with the standard Nokia 6 pin Molex power plug. If using another make of handsfree car kit you will require an Adaptor Lead for converting the Autoleads Telemute lead without chopping the wires and invalidating it's warranty. These leads supply your hands free car kit with power as well so you that you do not have to run cables directly to your cars battery.
Advantages include:
The 06-077B Telemute lead from Autoleads Is a Vehicle specific connector type lead that can be configured to switch radio off during a call if there is no mute position. You will get crystal clear audio reproduction through the vehicles own front two speakers.
This lead is suitable for 12 volt negative earth systems only!
All Autoleads products should be Installed by a suitably qualified technician. We will not be held responsible for damage to the vehicles electrical system due to incorrect installation or misuse of the product.
We will however provide FREE technical support via e-mail, or our Technical support forum. You would be expected to have a good understanding of vehicle electric's and a suitable 12 volt test lamp probe available for testing and configuration purposes.