The Autoleads 06-069NB Subaru 2004 Onwards Cellular Telemute Interface lead



Autoleads 06-069NB Subaru 2004 Onwards Cellular Telemute Interface lead

06-069NB additional Technical Information

This lead was released as 2004 onwards cars have an extra wire populated in the plug and often no mute available on the radio. The lead is also backwards compatible with earlier model cars.

If you are in any doubt about suitability of this lead please remove your stereo and look at the connectors on the rear, if it has two small rectangular 8 pin black plugs then you will require the 06-050B Universal ISO lead and not the Subaru lead.

It is the customers responsibility to check the connector type before ordering.

If you require further information on this product either post on our forum or you can contact the Autoleads technical department via their Website at www.autoleads.co.uk.

The Subaru 2004> lead is designed to fit Subaru cars which do not have Amplified head units and are fitted with the Factory stereo with the connectors shown above.

This lead will suit the following vehicles:

Not Suitable for Amplified Systems!


Cellular Telemute leads are used when installing an aftermarket hands free car phone kit. Once installed the lead will mute your head unit and redirect the call through the vehicles front speakers. All of the Autoleads Telemute leads are terminated with the standard Nokia 6 pin Molex power plug. If using another make of handsfree car kit you will require an Adaptor Lead for converting the Autoleads Telemute lead without chopping the wires and invalidating it's warranty. These leads supply your hands free car kit with power as well so you that you do not have to run cables directly to your cars battery.

Advantages include:

The 06-069NB Telemute lead from Autoleads Is a Vehicle specific connector type which has a V2 type relay which automatically mutes the sound during a call. You will get crystal clear audio reproduction through the vehicles own front two speakers.

This lead is suitable for 12 volt negative earth systems only!


All Autoleads products should be Installed by a suitably qualified technician. We will not be held responsible for damage to the vehicles electrical system due to incorrect installation or misuse of the product.

We will however provide FREE technical support via e-mail, or our Technical support forum. You would be expected to have a good understanding of vehicle electric's and a suitable 12 volt test lamp probe available for testing and configuration purposes.

06-069NB Product Specification and Technical Information