This lead is designed to work with Subaru cars that DO NOT have standard ISO connector aftermarket accessory type radios fitted to them such as the Pioneer, Sony, Clarion and Kenwood units. Most recent cars have a labeled Tel Mute wire on the rear.
If you are in any doubt about suitability of this lead please remove your stereo and look at the connectors on the rear, if it has two small rectangular 8 pin black plugs then you will require the 06-050B Universal ISO lead and not the Subaru lead.
It is the customers responsibility to check the connector type before ordering.
If you require further information on this product either post on our forum or you can contact the Autoleads technical department via their Website at www.autoleads.co.uk.
This lead will suit the following vehicles:
Not Suitable for Amplified Systems!
Cellular Telemute leads are used when installing an aftermarket hands free car phone kit. Once installed the lead will mute your head unit and redirect the call through the vehicles front speakers. All of the Autoleads Telemute leads are terminated with the standard Nokia 6 pin Molex power plug. If using another make of handsfree car kit you will require an Adaptor Lead for converting the Autoleads Telemute lead without chopping the wires and invalidating it's warranty. These leads supply your hands free car kit with power as well so you that you do not have to run cables directly to your cars battery.
Advantages include:
The 06-069B Telemute lead from Autoleads Is a Vehicle specific connector type which can be configured to switch off the radio or use the mute on newer models. You will get crystal clear audio reproduction through the vehicles own front two speakers.
This lead is suitable for 12 volt negative earth systems only!
All Autoleads products should be Installed by a suitably qualified technician. We will not be held responsible for damage to the vehicles electrical system due to incorrect installation or misuse of the product.
We will however provide FREE technical support via e-mail, or our Technical support forum. You would be expected to have a good understanding of vehicle electric's and a suitable 12 volt test lamp probe available for testing and configuration purposes.