The Autoleads 06-063B Early Nissan Cellular Telemute Interface lead



06-063B additional Technical Information

If you require further information on this product either post on our forum or you can contact the Autoleads technical department via their Website at www.autoleads.co.uk.

The Early Nissan lead is designed to fit Nissan cars which do not have Sat Nav or Amplified head units and are fitted with the Factory stereo with the connectors shown above.

This lead will suit the following vehicles:

This is provided the standard Nissan head unit has been fitted and has not had an ISO lead conversion for Pioneer, Sony, Kenwood or other aftermarket accessory head units fitted. If this has been done you may require a 06-050B

Not Suitable for Amplified Systems!


Cellular Telemute leads are used when installing an aftermarket hands free car phone kit. Once installed the lead will mute your head unit and redirect the call through the vehicles front speakers. All of the Autoleads Telemute leads are terminated with the standard Nokia 6 pin Molex power plug. If using another make of handsfree car kit you will require an Adaptor Lead for converting the Autoleads Telemute lead without chopping the wires and invalidating it's warranty. These leads supply your hands free car kit with power as well so you that you do not have to run cables directly to your cars battery.

Advantages include:

The 06-063B Telemute lead from Autoleads Is a Vehicle specific connector type which can be configured to switch off the radio or use the mute where available. You will get crystal clear audio reproduction through the vehicles own front two speakers.

This lead is suitable for 12 volt negative earth systems only!


All Autoleads products should be Installed by a suitably qualified technician. We will not be held responsible for damage to the vehicles electrical system due to incorrect installation or misuse of the product.

We will however provide FREE technical support via e-mail, or our Technical support forum. You would be expected to have a good understanding of vehicle electric's and a suitable 12 volt test lamp probe available for testing and configuration purposes.

06-063B Product Specification and Technical Information