The Autoleads 06-058B Universal ISO V2 module type Cellular Telemute Interface lead



06-058B Universal ISO V2 Telemute Interface lead from Autoleads

06-058B additional Technical Information

The Universal V2 ISO lead is designed to suit cars listed below which have Standard ISO connections on the rear of the stereo. Great for Nokia CARK-126 and CK-7W car kits with a passive antenna connection, this lead will stop the RF interference often associated with fitting one of these handsfree car phone kits with or without the antenna coupler.

This lead will suit the following vehicles:

NOT SUITABLE FOR AMPLIFIED SYSTEMS!

There were some Rover cars that had either this lead or the BMW 06-060B lead fitted depending on what was available during the period that BMW were running production. Our advice is pop out the stereo and check before buying!


Cellular Telemute leads are used when installing an aftermarket hands free car phone kit. Once installed the lead will mute your head unit and redirect the call through the vehicles front speakers. All of the Autoleads Telemute leads are terminated with the standard Nokia 6 pin Molex power plug. If using another make of handsfree car kit you will require an Adaptor Lead for converting the Autoleads Telemute lead without chopping the wires and invalidating it's warranty. These leads supply your hands free car kit with power as well so you that you do not have to run cables directly to your cars battery.

Advantages include:

The 06-058B Telemute lead from Autoleads Is a Universal ISO connector type lead that has a V2 5 way relay, this will mute the sound from the stereo even if there is no mute input at the rear. You will get crystal clear audio reproduction through the vehicles own front two speakers. Great for Sony head units that only have an ATT feature and not a full music mute and also stops RF bleed interference associated with fitting a Nokia CARK-126 or new CK-7W handsfree car phone kit. These kits will also require an adaptor the 06-208B.

This lead is suitable for 12 volt negative earth systems only!


All Autoleads products should be Installed by a suitably qualified technician. We will not be held responsible for damage to the vehicles electrical system due to incorrect installation or misuse of the product.

We will however provide FREE technical support via e-mail, or our Technical support forum. You would be expected to have a good understanding of vehicle electric's and a suitable 12 volt test lamp probe available for testing and configuration purposes.

06-058B Product Specification and Technical Information

This lead may require some configuration of the 12 volt constant live and the 12 volt switched live bullet connections on the lead to suit your head unit. There is a mute wire included with this lead but it is set up for the bottom left mute position in the power ISO plug. Some radios will require you to cut this wire and tap it into the relevant mute position or attach to the Sony ATT wire on the back of the radio. If you require further information on this product either post on our forum or you can contact the Autoleads technical department via their Website at www.autoleads.co.uk .
This lead will also suit the following aftermarket ISO head units: