Actual Product image to follow
This lead is designed for 2005> Chrysler cars fitted with Boston Accoustics Sound Audio systems. These units take the audio from the rear speaker channel through a crossover unit to all the speakers in the car, rather than using the conventional front speaker output for phone audio. This lead is basically an 06-086B but with the rear speaker channel fed through the V3 module instead of the front speakers on earlier Chryslers.
Please check with the Technical department before ordering. On some occasions it may be necessary to fit a blocking diode inline on the mute wire of the lead if you find that the speakers do not come back on after a call. We normally use a 1N4001 available from Maplin Electronics in the UK. Most car alarm installers will have these in their toolbox.
For more info on why this lead was introduced - CLICK HERE
If you require further information on this product either post on our forum or you can contact the Autoleads technical department via their Website at www.autoleads.co.uk.
This lead will suit the following vehicles:
Cellular Telemute leads are used when installing an aftermarket hands free car phone kit. Once installed the lead will mute your head unit and redirect the call through the vehicles front speakers. All of the Autoleads Telemute leads are terminated with the standard Nokia 6 pin Molex power plug. If using another make of handsfree car kit you will require an Adaptor Lead for converting the Autoleads Telemute lead without chopping the wires and invalidating it's warranty. These leads supply your hands free car kit with power as well so you that you do not have to run cables directly to your cars battery.
Advantages include:
The 06-046B Telemute lead from Autoleads Is a Vehicle Specific type lead that may require some configuration . You will get crystal clear audio reproduction through all of the vehicles speakers.
This lead is suitable for 12 volt negative earth systems only!
All Autoleads products should be Installed by a suitably qualified technician. We will not be held responsible for damage to the vehicles electrical system due to incorrect installation or misuse of the product.
We will however provide FREE technical support via e-mail, or our Technical support forum. You would be expected to have a good understanding of vehicle electric's and a suitable 12 volt test lamp probe available for testing and configuration purposes.