This lead is only suitable for Mazda vehicles manufactured after 2001 with factory fitted Bose stereo systems, The lead plugs directly into the rear of the stereo and the relay automatically mutes the sound from all the cars speakers and routes audio through the two front speakers only. Nothing is displayed on the radio when the mute is active.
This lead requires the stereo to be removed on order to install it, it is pretty much "plug and play", there is a thumbwheel adjuster on the relay for adjusting the audio output volume to get the best sound quality but we have found it is usually preset to a good setting and should require minimal adjustment. Radio removal on the new RX8 is very difficult and should really be left to a professional installer!
If you require further information on this product either post on our forum or you can contact the Autoleads technical department via their Website at www.autoleads.co.uk.
This lead will suit the following vehicles:
Cellular Telemute leads are used when installing an aftermarket hands free car phone kit. Once installed the lead will mute your head unit and redirect the call through the vehicles front speakers. All of the Autoleads Telemute leads are terminated with the standard Nokia 6 pin Molex power plug. If using another make of handsfree car kit you will require an Adaptor Lead for converting the Autoleads Telemute lead without chopping the wires and invalidating it's warranty. These leads supply your hands free car kit with power as well so you that you do not have to run cables directly to your cars battery.
Advantages include:
The 06-042B Telemute lead from Autoleads Is a Vehicle specific connector type lead that mutes the sound from the stereo during a call. You will get crystal clear audio reproduction through the vehicles own front two speakers.
This lead is suitable for 12 volt negative earth systems only!
All Autoleads products should be Installed by a suitably qualified technician. We will not be held responsible for damage to the vehicles electrical system due to incorrect installation or misuse of the product.
We will however provide FREE technical support via e-mail, or our Technical support forum. You would be expected to have a good understanding of vehicle electric's and a suitable 12 volt test lamp probe available for testing and configuration purposes.