The Autoleads 06-041B Citroen, Peugeot and Fiat Quadlok type Cellular Telemute Interface lead



The Autoleads 06-041B Citroen, Peugeot and Fiat Quadlok type Cellular Telemute Interface lead

06-041B additional Technical Information

The NEW Citroen, Peugeot and Fiat Quadlok Telemute lead is designed only to fit the vehicles listed below that use the 40 way Quadlok multimedia radio connector.

This lead will suit the following vehicles:

For JBL Amplified systems you will have to install an 06-212B inline on the speaker input wires from the kit!

To Purchase this item see - www.siocommunications.co.uk/Shopping/view_product.php?product=06-041B


Cellular Telemute leads are used when installing an aftermarket hands free car phone kit. Once installed the lead will mute your head unit and redirect the call through the vehicles front speakers. All of the Autoleads Telemute leads are terminated with the standard Nokia 6 pin Molex power plug. If using another make of handsfree car kit you will require an Adaptor Lead for converting the Autoleads Telemute lead without chopping the wires and invalidating it's warranty. These leads supply your hands free car kit with power as well so you that you do not have to run cables directly to your cars battery.

Advantages include:

The 06-041B Telemute lead from Autoleads Is a Vehicle Specific type lead that may require some configuration for car kits that require an ignition switched live. You will get crystal clear audio reproduction through the vehicles own front two speakers.

This lead is suitable for 12 volt negative earth systems only!


All Autoleads products should be Installed by a suitably qualified technician. We will not be held responsible for damage to the vehicles electrical system due to incorrect installation or misuse of the product.

We will however provide FREE technical support via e-mail, or our Technical support forum. You would be expected to have a good understanding of vehicle electric's and a suitable 12 volt test lamp probe available for testing and configuration purposes.

06-041B Product Specification and Technical Information

This lead is designed to work with all the new Peugeot 407 cars which use the Quadlok plug system but is specifically intended for models that do not have a mute present (Can Bus wire in mute position) and is also compatible with the other manufacturers models listed above. If installing a bluetooth car kit that requires an ignition switched live you may have to source this separately depending on the vehicle as the radio does not supply this feed on some models. If you require further information on this product either post on our forum or you can contact the Autoleads technical department via their Website at www.autoleads.co.uk .
Peugeot 407 radio head unit with Quadlok type connector.